Ubiquiti ECS-48-PoE 48-Port PoE+++ Layer 3 Switch

Name: Ubiquiti UniFi ECS-48-PoE — Enterprise Campus 1U Layer 3 Etherlighting™ Switch with 32 × 10 GbE + 16 × 2.5 GbE PoE+++ Ports and 4 × 25G SFP28 Uplinks (920 Gbps, 2,150W PoE Budget)
Brand: Ubiquiti
SKU: ECS-48-PoE
Price: 7230.85 AUD
Availability: OutOfStock

ECS-48-PoE

Ubiquiti UniFi ECS-48-PoE — Enterprise Campus 1U Layer 3 Etherlighting™ Switch with 32 × 10 GbE + 16 × 2.5 GbE PoE+++ Ports and 4 × 25G SFP28 Uplinks (920 Gbps, 2,150W PoE Budget)

💼

Deal Registration Required

The Ubiquiti Enterprise Campus 48-PoE Switch (ECS-48-PoE) ships under Ubiquiti’s deal-registration program for project pricing and deployment support. Please contact ARC IP Networks before ordering to register the deal, confirm lead time, and unlock project pricing.

📞 1300 100 440 ✉ info@arcip.com.au Contact Sales →

Features

Enterprise Campus 1U switch built for high-density, high-availability deployments — anchors a building floor, hospital wing, school block or hotel where every port must carry both 10 GbE data and 90W PoE+++ simultaneously.
(32) 10 GbE RJ45 PoE+++ ports (auto-negotiate 10G / 5G / 2.5G / 1G / 100M / 10M) — every copper uplink to a WiFi 7 AP, UVC camera, EAV endpoint or AV-over-IP fixture runs at multi-gig wire speed.
(16) 2.5 GbE RJ45 PoE+++ ports (auto-negotiate 2.5G / 1G / 100M / 10M) — for end-points that don't need 10 GbE but still benefit from 90W power.
(4) 25G SFP28 uplinks (25G / 10G / 1G) — twice the upstream capacity of the ECS-24-PoE, enough to LAG to the core without bottlenecking 48 access ports.
All 48 RJ45 ports support PoE+++ (90W per port, 802.3bt Type 4) for WiFi 7 APs, multi-radio cameras, digital signage, AV-over-IP endpoints and PoE-powered displays.
PoE budget: 2,150W shared / 950W redundant at 200–240V AC, or 1,750W shared / 750W redundant at 100–120V AC — driven by (2) hot-swap 1,200W AC/DC PSU modules.
920 Gbps switching capacity, 460 Gbps non-blocking throughput, 684 Mpps forwarding rate — double the dataplane of the ECS-24-PoE.
Layer 3 capable: 512 IPv4 static routes, 1,000 VLANs, 32,000 MAC address table, 8 MB packet buffer.
Etherlighting™ per-port multi-colour LEDs surface link health, PoE state and fault conditions from across the rack.
Carrier-grade redundancy: dual hot-swappable AC/DC 1,200W power modules and (4) hot-swappable fan modules.
1.3" front-panel touchscreen LCM for status, port telemetry, PoE consumption and diagnostics — no laptop at the rack required.
ESD protection ±30 kV air / ±19 kV contact — designed to survive busy patch bays and frequent re-cabling.
1U full-depth SGCC steel chassis, supports four-post 19" racks with post depths 650–1,000 mm.
Managed entirely through UniFi Network 9.0.114+ — no per-port licensing.
Certifications: CE, FCC, IC, ANATEL (06181-25-08356).

Specifications

Overview
Dimensions	442.4 × 43.7 × 496 mm
2.5 GbE RJ45 (PoE+++)	16 (2.5G / 1G / 100M / 10M)
10 GbE RJ45 (PoE+++)	32 (10G / 5G / 2.5G / 1G / 100M / 10M)
25G SFP28	4 (25G / 10G / 1G)
Max. PoE Output	PoE+++ (up to 90W per port)
Total PoE Availability (200–240V AC)	2,150W shared / 950W redundant
Total PoE Availability (100–120V AC)	1,750W shared / 750W redundant
Redundancy	(2) Hot-Swap PSUs + (4) Hot-Swap Fans
Form Factor	Rack Mount (1U, Full-Depth)

Performance
Switching Capacity	920 Gbps
Non-Blocking Throughput	460 Gbps
Forwarding Rate	684 Mpps
Supported VLANs	1,000
MAC Address Table Size	32,000
IPv4 Static Routes	512
Packet Buffer Size	8 MB
IPv4 Interfaces	256
MAC Interfaces	256

PoE Capability per Port
PoE+++ ports	48
PoE (802.3af)	15.4W per port
PoE+ (802.3at)	30W per port
PoE++ (802.3bt Type 3)	60W per port
PoE+++ (802.3bt Type 4)	90W per port

Hardware
Max. Power Consumption (Excl. PoE)	250W
Max. Power Consumption (Incl. PoE)	2,400W
Power Method	(2) Universal input, 100–240V AC, 50/60 Hz
Power Input Method	(2) AC input, hot-swappable power modules
Power Supply	(2) Hot-swappable AC/DC 1,200W modules
Supported Voltage Range	100–240V AC
Management	Ethernet, AR
Heat Dissipation (Excl. PoE)	785 BTU/hr
Weight	9.46 kg without brackets / 9.56 kg with brackets
Enclosure Material	SGCC steel
Mount Material	SGCC steel
Supported Rack Depth	482.6 mm (19") four-post racks; post depths 650–1,000 mm
LCM Display	1.3" touchscreen
Fan Method	(4) Hot-swappable fan modules
ESD Protection	Air ±30 kV / Contact ±19 kV
Ambient Operating Temperature	-5 to 40 °C
Ambient Operating Humidity	10 to 90% non-condensing
Certifications	CE, FCC, IC, ANATEL: 06181-25-08356

Software
UniFi Network	9.0.114 and later

Professional Overview

The UniFi ECS-48-PoE is the 48-port sibling of the ECS-24-PoE in Ubiquiti's Enterprise Campus line — a 1U full-depth, dual-PSU Layer 3 switch built for buildings, hotels, hospitals, schools, conference centres and large commercial sites where every drop must deliver both 10-gigabit data and 90W PoE+++. The port configuration is uniform across all 48 access ports: 32 × 10 GbE RJ45 PoE+++ + 16 × 2.5 GbE RJ45 PoE+++, with all 48 access ports rated for the full 802.3bt Type 4 (PoE+++, 90W) power class. Four 25G SFP28 uplinks handle aggregation back to the core — twice the upstream capacity of the 24-port model, which is what you want when downlink count doubles.

The dataplane delivers 920 Gbps switching capacity, 460 Gbps non-blocking throughput and 684 Mpps forwarding — double the ECS-24-PoE, so a fully loaded 10 GbE access tier still has full line-rate headroom for east-west traffic between WiFi 7 APs, cameras and AV-over-IP endpoints. The control plane is Layer 3 capable with 512 IPv4 static routes, 1,000 VLANs and a 32,000-entry MAC table, so the switch can route between segments at the access layer without sending all traffic upstream. Per-port Etherlighting™ surfaces link rate, PoE delivery and fault status visually from across a noisy MDF — a real operational improvement when there is no time to interrogate the UI mid-event.

Power is the differentiator. The switch ships with (2) hot-swap 1,200W AC/DC modules giving 2,150W of shared PoE budget at 200–240V AC (or 1,750W at 100–120V AC), with 950W / 750W respectively in redundant N+1 mode. (4) hot-swap fan modules complete the carrier-grade resilience story. Maximum power consumption is 250W excluding PoE output, 2,400W with PoE at full load, and heat dissipation is 785 BTU/hr excluding PoE current.

Build quality is uprated for permanent on-site deployment: SGCC steel chassis and mount, four-post 19" rack support for 650–1,000 mm depths, ESD immunity of ±30 kV air / ±19 kV contact, and an operating envelope of -5 to 40 °C with 10–90% non-condensing humidity. The 1.3" front-panel touchscreen LCM gives port-level status, PoE consumption and clock health without a laptop. The switch is managed through UniFi Network 9.0.114 or later alongside UDM Pro Max gateways, WiFi 7 APs, UNVRs and EAV-Bridge endpoints — no per-port licence. Certifications cover CE, FCC, IC and ANATEL (06181-25-08356). Australian stock from ARC IP Networks.

Part of our Ubiquiti UniFi Switches range — browse and compare the full lineup of PoE, aggregation, compact and 10G switches.

ECS 48 PoE vs ECS 48S PoE vs ECS 24 PoE — Which Enterprise Campus Switch?

All three Enterprise Campus switches share the defining feature: every port is PoE+++ capable at 90 W, powered by two replaceable supply modules that can run in shared mode for maximum budget or redundant mode so a failed supply does not take the access layer down. All are 1U full-depth with four hot-swappable fan modules and Layer 3 routing across 1,000 VLANs.

The difference between the two 48-port models is the port mix and what sits above them:

Specification	ECS 24 PoE	ECS 48 PoE	ECS 48S PoE
10 GbE RJ45 (PoE+++)	16	32	16
2.5 GbE RJ45 (PoE+++)	8	16	32
25G SFP28 uplinks	2	4	4
100G QSFP28	—	—	2
Stacking support	—	—	Yes
Dedicated management port	—	—	(1) 1 GbE
Switching capacity	460 Gbps	920 Gbps	680 Gbps
Non-blocking throughput	230 Gbps	460 Gbps	340 Gbps
Total PoE budget (shared, 200–240 V)	1,050 W	2,150 W	2,150 W
Max PoE per port	PoE+++ (90 W) on every port
Power supplies	(2) replaceable modules — shared or redundant mode
Cooling	(4) hot-swappable fan modules
Form factor	1U full-depth rack (650–1,000 mm post depth)

Choose the ECS 48 PoE when most of your access layer wants 10 GbE copper — server rooms, editing floors, dense WiFi 7 deployments — because it doubles the 10 GbE port count and delivers the highest switching capacity of the three. Choose the ECS 48S PoE when 2.5 GbE is the right access speed and you want the extras that come with it: stacking, two 100G QSFP28 ports for a very high-capacity uplink or stack link, and a dedicated out-of-band management port. Choose the ECS 24 PoE where 24 ports is enough. Compare the wider range in our UniFi switch guide. Australian stock from ARC IP Networks.

Frequently Asked Questions — Ubiquiti ECS-48-PoE

What is the Ubiquiti ECS-48-PoE?

The ECS-48-PoE is a 48-port Layer 3 Enterprise Campus switch where every port supports PoE+++ at 90 W. It provides 32 10 GbE and 16 2.5 GbE RJ45 ports plus four 25G SFP28 uplinks, with 920 Gbps switching capacity (460 Gbps non-blocking). Power comes from two replaceable supply modules delivering up to 2,150 W of PoE in shared mode, and cooling from four hot-swappable fan modules.

What is the difference between the ECS 48 PoE and the ECS 48S PoE?

Both deliver 90 W PoE+++ on all 48 ports, up to 2,150 W total, dual replaceable power supplies and four hot-swappable fans. The ECS 48 PoE has 32 10 GbE and 16 2.5 GbE ports with 920 Gbps switching capacity, suiting access layers that need 10 GbE copper widely. The ECS 48S PoE reverses that to 16 10 GbE and 32 2.5 GbE ports at 680 Gbps, and adds stacking support, two 100G QSFP28 ports and a dedicated 1 GbE management port.

How much PoE power does it provide?

Up to 2,150 W in shared mode on 200-240 V AC (about 1,750 W on 100-120 V), with PoE+++ at 90 W available on every one of the 48 ports. In redundant mode the available budget is lower, because either module alone must be able to carry the load - size against the redundant figure if uptime matters.

What is shared mode versus redundant mode?

The two power supply modules can run either way. Shared mode uses both together for the maximum PoE budget. Redundant mode means either module alone can carry the load, so a failed supply does not interrupt the switch, at the cost of roughly half the headline budget. Choose based on whether maximum power or continuous uptime matters more.

Does it support Layer 3 routing?

Yes. It is a Layer 3 switch with inter-VLAN routing and support for 1,000 VLANs, managed through the UniFi Network application with no licensing or per-port fees.

What rack space and depth does it need?

One rack unit, but it is a full-depth switch requiring four-post racks with post depths between roughly 650 and 1,000 mm. Check your cabinet depth before ordering - it will not fit a shallow wall-mount enclosure.

Which devices can it power?

Any current UniFi device and most third-party PoE hardware: WiFi 7 access points including the E7, AI and PTZ cameras, the UniFi AI Key, Access hubs needing PoE++, and 802.3af/at/bt devices generally - each at up to 90 W over a single cable.

Where can I buy the Ubiquiti ECS-48-PoE in Australia?

The Ubiquiti ECS-48-PoE is available in Australia from ARC IP Networks, an Australian Ubiquiti reseller. Order online on this page with a GST tax invoice, Australia-wide shipping, or free warehouse pickup from Melbourne. Project and volume pricing for campus, school and enterprise rollouts is available on request or via 1300 100 440.

How much does the ECS-48-PoE cost in Australia?

Current Australian pricing is shown live on this page in AUD including GST, and is kept competitive against other Australian retailers. Project pricing for campus and multi-switch rollouts is available - request a trade quote.

Ubiquiti ECS-48-PoE: 48 PoE+++ ports at 90W each

The Switch Enterprise Campus 48 PoE is an enterprise Layer 3 Etherlighting switch with 48 PoE+++ ports delivering up to 90W per port, and 460 Gbps of non-blocking throughput (920 Gbps switching capacity).

Port layout is 32 (All PoE+++) (10G/5G/2.5G/1G/100M/10M) 10 GbE RJ45, 16 (All PoE+++) (2.5G/1G/100M/10M) 2.5 GbE RJ45, 4 (25G/10G/1G) 25G SFP28. It is a Rack Mount (1U, Full-Depth) unit weighing Without mounting brackets: 9.46 kg (20.9 lb) With mounting brackets: 9.56 kg (21.1 lb).

PoE budget in Australia: shared vs redundant

This is the specification that decides your design, and it is easy to get wrong. The PoE budget depends on both your supply voltage and whether you run the two power modules in shared or redundant mode.

Australia runs at 230V, so the 200–240V figures apply:

Mode	PoE budget at 230V	What it means
Shared mode	2,150W	Both modules contribute. Maximum PoE, no PSU redundancy.
Redundant mode	950W	One module can fail without dropping the switch — but budget falls sharply.

Plan for this before you order. If you need PSU redundancy, your usable PoE budget is 950W, not 2,150W. Loading the switch to shared-mode capacity and then enabling redundancy will leave ports unable to power up.

Per-port classes are 15.4W (PoE), 30W (PoE+), 60W (PoE++) and 90W (PoE+++). Our access point comparison lists the draw of each UniFi AP so you can total the load.

Full voltage and mode matrix: 200-240V AC Shared Mode: 2,150W 100-120V AC Shared Mode: 1,750W 200-240V AC Redundant Mode: 950W 100-120V AC Redundant Mode: 750W

Specifications

Non-blocking throughput	460 Gbps
Switching capacity	920 Gbps
PoE+++ ports	48 at up to 90W
10 GbE RJ45	32 (All PoE+++) (10G/5G/2.5G/1G/100M/10M)
2.5 GbE RJ45	16 (All PoE+++) (2.5G/1G/100M/10M)
25G SFP28	4 (25G/10G/1G)
Power supplies	(2) Hot-swappable AC/DC 1,200W power modules
Appliance draw	250W (Excluding PoE Output) 2,400W (Including PoE Output)
Form factor	Rack Mount (1U, Full-Depth)
Weight	Without mounting brackets: 9.46 kg (20.9 lb) With mounting brackets: 9.56 kg (21.1 lb)
Operating temperature	-5 to 40° C (23 to 104° F)
Display	1.3" touchscreen

Note it is a full-depth 1U chassis — check your rack depth, and that both hot-swap power modules and the hot-swap fans are accessible.

The S variants (24S, 48S) add stacking support; the non-S models offer a different port mix. See the ECS-Aggregation for the 25G aggregation layer above them.

ARC IP Networks, authorised Ubiquiti reseller in Australia — Australian stock, manufacturer warranty, fast shipping, trade pricing. — ARC IP Networks is an authorised Ubiquiti reseller in Australia — Australian stock, full manufacturer warranty, fast shipping and trade pricing. Call 1300 100 440 or read more about buying from an authorised reseller.

Buy the Ubiquiti ECS-48-PoE in Australia

ARC IP Networks is an authorised Ubiquiti reseller supplying the ECS-48-PoE from Australian stock, with full manufacturer warranty and fast shipping nationwide.

Authorised Ubiquiti reseller — genuine Australian stock, not grey import
Full manufacturer warranty with local RMA support
Competitive pricing, monitored against the Australian market daily
Fast dispatch Australia-wide, or collect from our warehouse
Project pricing and deal registration for enterprise rollouts

Browse UniFi switches, cloud gateways, access points and the Protect camera range. More on buying from an authorised Ubiquiti reseller in Australia.

Brand	UBIQUITI
Switching Capacity	920 Gbps
Network Layer	Layer 3
Form Factor	Rack Mount (1U, Full-Depth)
Port Speed	(16) 2.5 GbE + (32) 10 GbE + (4) 25G SFP28
Ports	52 Ports
Network Connectivity	Wired
Uplink	4 × 25G SFP28
PoE Specification	PoE+++ 802.3bt+ Type 4 / 90W per port / 2,150W Budget (200-240V) / 1,750W (100-120V)
Switch Features	Etherlighting, Hot-Swap 1,200W PSU & Fans, Touchscreen LCM, Layer 3 Routing, ESD ±30 kV

Accurate Shipping Costs

Our online shipping calculator is designed to provide a final, accurate shipping cost based on the items in your cart and your delivery postcode. Shipping costs are calculated at checkout based on your order and delivery postcode. The final cost is calculated based on several factors which are automatically accounted for by our system, including:

The stock location of the item(s) across our warehouses.
Orders with multiple items that may require special packaging.
The weight and dimensions of the order (including heavy or oversized items).
The delivery courier servicing your specific region.

Delivery Times

Standard Processing

Most orders placed by 2pm AEDT are dispatched for next working day delivery. Larger orders may require 1-2 additional business days for processing. If timing is critical, please contact us to discuss expedited options (additional charges may apply).

Delivery Timeframes

Region	Processing Time	Express Delivery	Standard Delivery
VIC, NSW, SA, QLD Metro, TAS	1-2 business days	1-2 business days	2-4 business days
NT, WA, QLD Rural	1-2 business days	1-2 business days	3-5 business days
New Zealand	1-2 business days	2-3 business days	4-10 business days

Please note: Processing times may extend during peak periods such as Christmas and end of financial year.

Free Warehouse Pickup

Save on shipping costs with free pickup from our ARC IP Networks Blackburn warehouse. Simply place your order online or by phone, and collect during business hours (Monday to Friday). Please allow time for picking and packing. For urgent orders, call 1300 100 440 to confirm your order is ready.

ARC IP Networks Pickup Address: 6 George Street, Blackburn, VIC 3130

Insurance & Tracking

All ARC IP Networks shipments are fully insured and trackable. Once dispatched, you'll receive an email with your tracking number and courier website details. If your item is confirmed lost or damaged by our courier, we'll arrange a replacement in consultation with you.

International Shipping

ARC IP Networks ships to New Zealand. Please note:

Import duties and taxes vary by country
Buyers are responsible for all customs charges
Contact your local customs authority before ordering
We'll provide required documentation for smooth customs clearance
Buyers cover all shipping costs for returns due to refused duties/taxes

Delivery Requirements

Signature Required

All deliveries must be signed for. If you won't be home, contact our Sales Support team to arrange Authority to Leave. Important: Authority to Leave voids shipping insurance if parcels are lost or stolen.

Delivery Restrictions

We do not deliver to PO Boxes or Parcel Lockers as our couriers cannot access them. Orders sent to these addresses will be returned, incurring redelivery fees.

Shipping Issue Resolution

ARC IP Networks works closely with our shipping partners to resolve any delivery issues quickly and fairly:

Confirmation: We verify expected delivery dates with our shipping partners
Investigation: Issues outside normal timeframes trigger formal investigations
Communication: We keep you updated throughout the resolution process
Resolution: Confirmed lost items are replaced or refunded after investigation completion

Please note: Refunds for lost, missing, or delayed orders cannot be processed until shipping partner investigations are complete. This does not affect your rights under the Australian Consumer Law, and refunds or replacements will be provided where required once loss or damage is confirmed.

Warranty & Faulty Products

ARC IP Networks complies with the Australian Consumer Law (ACL).

If a product is faulty, damaged, not of acceptable quality, or does not perform as advertised, you are entitled to a repair, replacement, or refund in accordance with ACL.

Manufacturer Warranty Returns

For faults developing after 14 days within the warranty period:

Contact ARC IP Networks first at info@arcip.com.au or 1300 100 440
We will assess the issue and coordinate with manufacturers, authorised service centres, or distributors on your behalf
Where required, a manufacturer RMA may be arranged
ARC IP Networks manages the return process and next steps

Dead on Arrival (DOA)

Products that arrive faulty or damaged must be reported within 14 days of delivery.

ARC IP Networks will arrange assessment, replacement, or refund as appropriate.

Change of Mind & Non-Faulty Returns

Change-of-mind returns must be requested within 14 days of delivery. For change-of-mind returns, the product must be unused, unopened, in its original packaging, and returned with all accessories and documentation. These conditions apply only to change-of-mind returns and do not limit or exclude your rights under the Australian Consumer Law. Some products are not eligible for change-of-mind returns, including:

Ex-demo products
Clearance or markdown items
Special-order items
Products clearly marked “No Change-of-Mind Returns”

Important

This does not affect your rights under Australian Consumer Law.

If a product is faulty, not of acceptable quality, or does not meet advertised specifications, it remains eligible for return regardless of category.

Refunds & Processing Timeframes

Approved refunds are processed within 7 business days of receiving returned goods
Refunds are issued to the original payment method, unless otherwise agreed
Replacement or repair may be offered where appropriate
Store credit may be offered only with customer consent

Handling fees and non-returnable service charges may not be refundable where permitted by law.

Restocking Fees

For approved change-of-mind or non-faulty returns, a 15% restocking fee applies.

Any applicable restocking fee will be clearly communicated prior to return approval
The fee will be deducted from the refund amount
Restocking fees do not apply to returns made under the Australian Consumer Law, including faulty, damaged, or misrepresented goods.

Return Shipping Costs

Change-of-mind returns: The customer is responsible for return shipping costs.
Faulty or defective products: ARC IP Networks covers return shipping under Australian Consumer Law.

Non-Warranty Repairs

For issues not covered by warranty:

ARC IP Networks will provide a quote before proceeding
Customers are responsible for all shipping and service costs
No repairs are undertaken without customer approval

Return Methods

Returns may be made:

In-store at ARC IP Networks – 6 George Street, Blackburn VIC 3130
Or by shipment as instructed by our support team

Proof of purchase is required for all returns.

Enquire About this Product

Any questions about this product? Fill out the form below, and we'll get back to you soon!

SKU	ECS-48-PoE
Barcode	810084699119
Tags	PoE++ , 2.5GbE , 10GbE , UniFi , Switch , Layer 3 , Rackmount , Managed Switch , Ubiquiti , Etherlighting , Enterprise , 48-Port , 25G SFP28 , PoE+++ , Campus , Touchscreen , Hot-Swap PSU , 25G , Deal Registration

Ubiquiti UniFi Enterprise Audio/Video Bridge (EAV-Bridge) — PoE+ AV-over-IP Transceiver with HDMI 2.0 4K60, XLR Professional Audio I/O, 48V Phantom Power and 1.3" Touchscreen

$ 554.40

Ubiquiti UniFi Enterprise NVR Core (ENVR-Core) — 3U Rack-Mount 16-Bay Network Video Recorder for 500 HD / 300 4K Cameras with 128-Core ARM, 64 GB RAM, 2× 25G SFP28, Dual SFF-8644 Drive Expansion (Up to 48 Drives) and Hot-Swap Dual PSU

$ 8,277.86

Ubiquiti UniFi ECS-48-PoE — Enterprise Campus 1U Layer 3 Etherlighting™ Switch with 32 × 10 GbE + 16 × 2.5 GbE PoE+++ Ports and 4 × 25G SFP28 Uplinks (920 Gbps, 2,150W PoE Budget)

$ 7,230.85 7230.85 AUD $ 7,230.85 incl. GST

Not Available For Sale

Brand

Switching Capacity

Network Layer

Form Factor

Port Speed

Ports

Network Connectivity

Uplink

PoE Specification

Switch Features

UBIQUITI

SKU

Barcode

Tags

ECS-48-PoE

Ubiquiti UniFi ECS-48-PoE — Enterprise Campus 1U Layer 3 Etherlighting™ Switch with 32 × 10 GbE + 16 × 2.5 GbE PoE+++ Ports and 4 × 25G SFP28 Uplinks (920 Gbps, 2,150W PoE Budget)

Deal Registration Required

Features

Specifications

Professional Overview

ECS 48 PoE vs ECS 48S PoE vs ECS 24 PoE — Which Enterprise Campus Switch?

Frequently Asked Questions — Ubiquiti ECS-48-PoE

What is the Ubiquiti ECS-48-PoE?

What is the difference between the ECS 48 PoE and the ECS 48S PoE?

How much PoE power does it provide?

What is shared mode versus redundant mode?

Does it support Layer 3 routing?

What rack space and depth does it need?

Which devices can it power?

Where can I buy the Ubiquiti ECS-48-PoE in Australia?

How much does the ECS-48-PoE cost in Australia?

Ubiquiti ECS-48-PoE: 48 PoE+++ ports at 90W each

PoE budget in Australia: shared vs redundant

Specifications

Related UniFi switches

Buy the Ubiquiti ECS-48-PoE in Australia

Accurate Shipping Costs

Delivery Times

Standard Processing

Delivery Timeframes

Free Warehouse Pickup

Insurance & Tracking

International Shipping

Delivery Requirements

Signature Required

Delivery Restrictions

Shipping Issue Resolution

Warranty & Faulty Products

Manufacturer Warranty Returns

Dead on Arrival (DOA)

Change of Mind & Non-Faulty Returns

Important

Refunds & Processing Timeframes

Restocking Fees

Return Shipping Costs

Non-Warranty Repairs

Return Methods

Enquire About this Product

Similar Products

Ubiquiti UniFi ECS-48-PoE — Enterprise Campus 1U Layer 3 Etherlighting™ Switch with 32 × 10 GbE + 16 × 2.5 GbE PoE+++ Ports and 4 × 25G SFP28 Uplinks (920 Gbps, 2,150W PoE Budget)

$ 7,230.85