Hikvision DS-1604ZJ-CORNER Corner Mount Bracket for PTZ Cameras

Hikvision DS-1604ZJ-CORNER Corner Mount Bracket for PTZ Cameras

The Hikvision DS-1604ZJ-CORNER is a heavy-duty corner mounting bracket in aluminium alloy and steel, designed to carry a Hikvision PTZ speed dome camera on the external corner of a building where a flat wall face is not available.

Key features

• Purpose-built for building corners, where a standard wall mount cannot be fixed squarely
• Aluminium alloy and steel construction sized for the weight and torque of a PTZ speed dome
• 465 mm reach sets the camera clear of the corner for unobstructed pan coverage
• Cable routed internally, protecting it from weather and interference
• 4.3 kg bracket weight — specify masonry fixings rated for the combined bracket and camera load
• Used with the matching Hikvision PTZ pole and wall mount range for consistent site hardware

Specifications

Specifications sourced from Hikvision published product data. Dimensions and weights are nominal and may vary slightly between production batches.

Frequently asked questions

Which cameras does the DS-1604ZJ-CORNER support?

It is designed for Hikvision PTZ speed dome cameras. Because PTZ cameras vary considerably in weight and size, confirm the specific camera model against the bracket before ordering — Hikvision publishes a bracket cross-reference list for this purpose.

Why use a corner mount instead of a wall mount with a spacer?

A corner mount transfers the load into both wall faces and holds the camera square to the corner. Packing a flat wall mount out to clear a corner puts the fixings in shear and leaves the camera poorly aligned, which matters on a PTZ where the pan axis needs to be vertical.

Can it be used on an internal corner?

The bracket is designed primarily for external corners. Internal-corner installations are possible depending on the geometry, but check clearance for the camera's pan envelope before committing.

Does the bracket include a junction box?

No. The DS-1604ZJ-CORNER is the corner mount alone. If you need an integrated junction box, Hikvision offers corner and pole variants that include one — the DS-1604ZJ-BOX-CORNER and DS-1604ZJ-BOX-POLE.

What fixings should be used?

Fixings are not supplied, because the correct choice depends entirely on the substrate. At 4.3 kg before the camera is added, this bracket needs mechanical or chemical anchors rated for the combined load with an appropriate safety factor. Have the fixing specification confirmed for the wall construction.

Overview

Building corners are where camera coverage is usually most valuable and mounting hardware is usually least suitable. A corner gives a camera two elevations to watch at once, which is exactly what you want from a PTZ — but a flat wall mount cannot be fixed squarely to a corner, and packing one out with spacers puts the fixings into shear and leaves the pan axis off vertical.

The DS-1604ZJ-CORNER is built for that case. Aluminium alloy and steel, 465 mm of reach to clear the corner so the camera has an unobstructed pan envelope, and a geometry that transfers load into both wall faces rather than cantilevering off one. Cable runs internally through the bracket body, protected from weather and from interference.

This is substantial hardware — 4.3 kg before a camera is added — and the fixing specification deserves attention. PTZ cameras are heavier than fixed cameras, they move, and on an exposed corner they see wind. Mechanical or chemical anchors rated for the combined load with an appropriate safety factor are the right approach, and on commercial work the fixing specification should be confirmed against the wall construction.

ARC IP Networks supplies the DS-1604ZJ-CORNER as genuine Australian stock with full Hikvision warranty. Hikvision's PTZ range spans a wide spread of sizes and weights, so send us your camera model and we will check it against the bracket cross-reference list before you commit.

Buying from ARC IP Networks

ARC IP Networks is an authorised Hikvision reseller based in Blackburn, Melbourne. Everything we ship is genuine Australian stock carrying the full Hikvision manufacturer warranty, with RMA handled locally rather than sent offshore. Parallel-imported hardware is cheaper for a reason: it is not covered here, and a warranty claim on it becomes your problem rather than the distributor’s.

Accessories like this one are usually ordered alongside cameras rather than on their own, and that is the sensible way to buy them. Working out bracket and junction box requirements at the same time as the camera schedule avoids the most common delay on a CCTV job — cameras arriving on site with nothing to mount them on. Send us the camera models and quantities and we will build the accessory list against them.

We hold trade accounts for installers, integrators and electrical contractors, and we price match. If you have a written quote from another Australian supplier, send it through and we will do our best on it. For project volumes it is worth talking to us directly rather than ordering line by line through the site.

Beyond supply, we design and deploy the networks these systems run on — structured cabling, PoE switching, network design and GPON fibre infrastructure through our sister company ARC DATA. If a job needs more than boxes, we can take on as much or as little of it as suits you.